I tested Anker’s cheapest wireless charging stand, and I can’t argue with the value, even if it’s not fast with today’s phones

Anker 313 Wireless Charger Stand review

The Anker 313 Wireless Charger Stand has a list price of $23.99 on the Anker US website for the black model, and at the time of writing there’s a $9 saving on offer, lowering the price to just $14.99. The Anker 313 Wireless Charger Stand can also be purchased at Amazon at a list price of $19.99 / £19.99, but as I write this review it’s been reduced to $14.99 / £13.99 thanks to a limited-time deal.

One thing to note is that the product name varies slightly depending on where you look. I’ve come to expect Anker’s disjointed and mildly frustrating naming conventions after reviewing so many of their chargers. There’s often a different product name on the box than the website, and the name tends to differ again on Amazon too. This charger is sold as the Anker 313 Wireless Charger (Stand) on the Anker website and at Amazon US but is referred to as the PowerWave in the contents, and on the packaging. It’s sold under the name Anker PowerWave stand at Amazon UK. If you ever get confused by the names of Anker chargers, you can cross-reference the model numbers for confirmation.

The design of the Anker 313 Wireless Charger Stand couldn’t get much simpler. The charging stand comes in one piece, with the backward-angled phone holder attached to the front edge of the stabilizing rear stand. The outer is made of a soft-sheen plastic that is nice to touch, but there is a slightly sharp edge to the join between the front and back panels of the charging pad. A small shelf extends at an angle from the bottom of the charging pad, which was easy to place my phone on, however, it didn’t offer much stability as it lacks any lip or silicone for extra hold. On the front of this ledge is a small blue LED ring that illuminates when the charger is connected to power.

The Anker 313 Wireless Charger Stand is available in Black on the Anker website and at Amazon, with the latter also offering a white model that costs an extra dollar or so. Curiously, Anker has used an outdated micro USB power port on the 313 Wireless Charger Stand, though fortunately it does provide a 3 ft / 900mm cable, saving me scrabbling through drawers in a vain attempt to hunt one down, although I would have preferred more length.

As this charger doesn’t feature a MagSafe attachment, phone placement must be correct to ensure efficient charging. This lack of magnetic hold also means that anyone on the clumsy side, such as myself, must be careful not to knock it because there’s nothing to hold the phone in place.

When it came to charging an iPhone 13 Pro, the performance of the Anker 313 Wireless Charger Stand was underwhelming, taking three hours and twenty minutes to fully recharge from 0% – 100%. This is especially disappointing considering the INIU I212 Adjustable 15W Fast Wireless Charger was able to perform the same task in just two hours and sixteen minutes. Granted, the INIU charger is a little more expensive, but it more than makes up for it with the adjustable viewing angle, and the aforementioned charging speed.

Personally, I wouldn’t purchase an Anker 313 Wireless Charger Stand due to its static design and slow charging speeds. However, when the price is discounted, it could prove a worthwhile purchase for someone who isn’t fussed about speedy charging and wants to take their phone off the stand with ease, as there’s no magnetic attachment to contend with. But even then, I’d suggest spending just a little more and buying the aforementioned INIU I212 Adjustable 15W Fast Wireless Charger; it’s worth it. If you’re looking for something faster or capable of charging more than one device, I recommend checking out our pick of the best wireless chargers.

Anker 313 Wireless Charger Stand review: Price & specs

Should I buy the Anker 313 Wireless Charger Stand?

Buy it if…